If an angled wall is snapped to to a Junction, Notification 653 appears. Then you can use the Align tool to adjust the angle of the wall.

 

 

1.Select the angled i-Line, and right-click to open Information.

 

 

In the Information dialog, you can see how must the angle of the wall is off.

 

 

2.To see the angle of the wall, look under Wall Set at the Rotation.

 

 

3.To close the Information dialog, click OK.

 

 

4.Zoom in close on the all and the Junction.

 

 

5.If you want to turn off Action Required Notifications for a clearer view, click the icon on the secondary toolbar.

 

 

Action Required Notifications disappear from ICE 2D.

 

Caution: Remember to turn your Notifications on after you change align the wall so that you can confirm that you fixed the angle of the wall.

 

6.Select the wall, and right-click to choose Align.

 

 

Assistance text appears in the top-left corner of ICE 2D, asking you to select a target point. Available target points are outlined blue. When you hover your mouse over a possible target point, it becomes a solid blue circle.

 

7.Select the target point on the wall that you want to straighten.

 

 

The assistance text in the top-left corner of ICE 2D updates, asking you to select a reference. Available reference points are outlined in purple circles. When you hover your mouse over a possible reference point, it becomes a solid purple circle.

 

8.Select a reference point on the Junction.

 

 

After you select your target and reference points, ICE updates to display reference dimensions and angles. You can use these dimensions and angles to re-align the selected i-Line.

 

9.Click on the angle that you want to change.

 

 

10.In Confirm Angle, enter a new angle, and click OK

 

 

You see a preview of your updated angle.

 

 

11.Press Enter.

 

The angle of your wall updates.  wall moves to line up with Junction.

 

 

12.If you turned the Action Required Notifications off, click on the icon on the secondary toolbar to turn them back on.

 

 

13.Confirm that Notification 653 is gone and that no other notifications appear.

 

Caution: When you change the angle of a wall that is snapped to a Junction, the wall may unsnap from the Junction, causing Notification 635 to appear. You can open the Junction Alignment Info dialog to see which wall has unsnapped from the junction.

 

 

14.If Notification 635 appears, re-snap the wall to the Junction.

 

 

Related Links:

•Viewing Junction Alignment Info

•Moving a Wall to Snap to a Junction

 

Topic last updated on 3/16/2023.