Please enable JavaScript to view this site.

 

 

Recalibration allows you to calibrate the orientation of the digital space to the physical space.  

 

If you want to join an ICEreality Connect experience from the same physical location as another person using another device (i.e. you and a coworker are in the same conference room and wish to join an experience together), you should recalibrate your devices after joining the experience. Recalibrating helps your physical positions in real life match what you are seeing in virtual reality. This stops people running into each other in real life and have the same perspective of the space

 

Recalibration requires two physical points to be used as reference in the real world.  

 

IMG-ICEreality-Connect_Mobile_049 Photo showing two physical calibration points

 

To begin recalibration:

 

1.While in an ICEreality experience, tap on the screen to bring up the controls.

 

IMG-ICEreality-Connect_Mobile_050 ICEreality Connect Screen before and after a tap bringing up the controls_

 

2.Tap on the three dots in the top right corner to bring up the menu controls.

 

3.Tap on Recalibration in the menu controls

 

IMG-ICEreality-Connect_Mobile_051 ICEreality Connect menu controls up, indicating to tap on Recalibration

 

4.On screen, a view of your camera will display. An arrow along with a text message will indicate for you to “point the camera downwards.”

 

IMG-ICEreality-Connect_Mobile_052 ICEreality Connect reposition arrow instructions

 

5.Point the phone towards the floor, and a crosshair with arrows moving towards it will be displayed on the floor.

 

IMG-ICEreality-Connect_Mobile_053 ICEreality Connect reposition arrow pointed down at the floor instructions

 

6.Align the crosshairs with your first calibration point. When aligned, tap on the screen to confirm your first point.

 

IMG-ICEreality-Connect_Mobile_054 ICEreality Connect reposition arrow aligned with physical point

 

7.After setting your first point, the crosshairs will remain static on that point and a new blue arrow will appear on screen.

 

IMG-ICEreality-Connect_Mobile_055 ICEreality Connect reposition point set and second arrow showing

 

8.Move the blue arrow so the tip is touching the second calibration point. When aligned, tap on the screen to confirm your second point.

 

IMG-ICEreality-Connect_Mobile_056 ICEreality Connect reposition arrow aligned with physical point

 

9.The 3D elements in ICEreality will reload and will now be aligned to your calibration points.

 

IMG-ICEreality-Connect_Mobile_057 ICEreality Connect reposition point set and second arrow showing

 

10.Repeat these steps on any additional devices to create calibration across devices with one another.

 

11.If all devices are calibrated properly, when the phone is pointed at another participant, youll see there corresponding ICEcream cone.

 

IMG-ICEreality-Connect_VR_058

Created with Help & Manual 7 and styled with Premium Pack Version 3 © by EC Software